Table of Contents
Advertisement
2. Installation
Switch-M16eGi can be installed to a stainless steel product, a 19-inch rack, or
on the wall.
2.1. Mounting to 19-inch Rack
Take out the supplied 2 mounting brackets (for 19-inch rack) and 8 screws
(for fixing the main unit and the mounting bracket), and fix the brackets to
the main unit by tightening screws into 4 holes located at the sides. Then,
mount this Switching Hub firmly to the rack using the supplied 4 screws (for
19-inch rack) or screws furnished at the rack.
Fig. 2-1 Mounting to 19-inch Rack
21
Advertisement
Table of Contents
