Table of Contents
Advertisement
Available commands are listed below.
N
Show the next page.
Press "N." The screen shows the next port.
P
Show the previous page.
Press "P." The screen shows the previous port.
A
Enable/disable a port.
Press "A." The command prompt changes to "Select port number to be changed>."
Enter a port number you wish to change. Press "0" to change the settings of all
ports at a time. Then, the command prompt changes to "Enable or Disable port #
(E/D)>." Press "E" to enable the port. Press "D" to disable it. When you complete the
setting change, the display on the screen is automatically updated.
M Configure the speed and full-duplex/half-duplex settings for each port.
Press "M." The command prompt changes to "Enter port number>." Enter a port
number you wish to change. Press "0" to change the settings of all ports at a time.
Then, the command prompt changes to "Enter mode for port # (A/N)>." Press "A"
to enable the auto negotiation mode. Press "N" to disable it. If "N" is selected, the
command prompt changes to "Enter speed for port #(10/100)>." Select a desired
communication speed. Upon setting, the command prompt changes to "Enter
duplex for port #(F/H)>." Select "F" for full-duplex. Select "H" for half-duplex. When
you complete the setting change, the display on the screen is automatically
updated.
Mode:
A:
N:
Speed:
10:
100:
Duplex:
F:
H:
F
Enable/disable the flow control.
Press "F." The command prompt changes to "Select port number to be changed>."
Enter a port number you wish to change. Press "0" to change the settings of all
ports at a time. Then, the command prompt changes to "Enable or Disable flow
control for port # (E/D)>." Press "E" to enable the function. Press "D" to disable it.
When you complete the setting change, the display on the screen is automatically
updated.
S
Enable/disable the AUTO-MDI function.
Enable the auto negotiation mode.
Disable the auto negotiation mode (fixing the speed at Giga is
not supported).
Set at 10 Mbps.
Set at 100 Mbps.
Set at full-duplex.
Set at half-duplex.
76
Advertisement
Table of Contents
