Table of Contents
Advertisement
Screen Description
Global MAC Auth
Displays the MAC authentication operation status of the entire
Status
device.
Enabled
Disabled
Global WEB Auth
Displays the WEB authentication operation status of the entire
Status
device.
Enabled
Disabled
802.1X Port-based
Displays ports with IEEE802.1X port-based access control enabled.
Auth Ports
Access control is enabled for all ports in the factory default.
802.1X MAC-based
Displays ports with IEEE802.1X MAC-based access control enabled.
Auth Ports
MAC Auth Ports
Displays ports with MAC authentication enabled.
WEB Auth Ports
Displays ports with WEB authentication enabled.
Available commands are listed below.
M Configure the MAC authentication status settings of the entire device.
Press "M." The command prompt changes to "Enable or Disable global MAC auth
status (E/D)>." Press "E" to enable the status or "D" to disable it.
W Configure the WEB authentication status settings of the entire device.
Press "W." The command prompt changes to "Enable or Disable global WEB auth
status (E/D)>." Press "E" to enable the status or "D" to disable it.
P
Configure the IEEE802.1X port-based access control port settings.
Press "P." The command prompt changes to "Enter port number>." Enter the port
number to be specified.
A
Configure the IEEE802.1X MAC-based access control port settings.
Press "A." The command prompt changes to "Enter port number>." Enter the port
number to be specified.
C
Configure the MAC authentication port settings.
Press "C." The command prompt changes to "Enter port number>." Enter the port
number to be specified.
E
Configure the WEB authentication port settings.
Press "E." The command prompt changes to "Enter port number>." Enter the port
number to be specified.
Q
Return to the parent menu.
MAC authentication is enabled.
MAC authentication is disabled. (Factory default
setting)
WEB authentication is enabled.
WEB authentication is disabled. (Factory default
setting)
168
Advertisement
Table of Contents
