Table of Contents
Advertisement
Screen Description
Jumbo
Shows the current jumbo frame settings.
The factory default setting is "Disabled."
Enabled
Disabled
Port
Shows the port number.
Trunk
Shows the group number for a trunked port.
Type
Shows the port type.
100TX
1000T
1000X
Link
Shows the current link status.
Up
Down
Port Name
Shows the port name.
EAP Pkt
Shows the current EAP Packet Forwarding settings.
FW
The factory default setting is "Disabled".
Enabled
Disabled
Jumbo frame is enabled.
Jumbo frame is disabled.
The port type is 10/100BASE-TX.
The port type is 10/100/1000BASE-T.
The port type is SFP extension port.
Link is established successfully.
Link is not established.
EAP Packet Forwarding is enabled.
EAP Packet Forwarding is disabled.
79
Advertisement
Table of Contents
