Table of Contents
Advertisement
IP address
Shows the SNMP manager IP address.
Available commands are listed below.
U
Set a SNMP user name.
Press "U." The command prompt changes to " Enter User Name>." Enter a SNMP user
name.
G
Set a name of group.
Press "G." The command prompt changes to " Enter Group Name>." Enter a SNMP
group name.
K
Set an authentication key.
Press "K." The command prompt changes to " Use Password or Key>." Press "P" to
enter a password. Press "K" to enter a key. If "P" is selected, the command prompt
changes to " Enter Password>." Enter a password. If "K" is selected, the command
prompt changes to "Enter Key>." Enter a key.
A
Set the authentication method.
Press "A." The command prompt changes to " Enter Authentication Type>." Press "M"
to select MD5. Press "S" to select SHA.
P
Set the encryption key.
Press "P." The command prompt changes to " Use Password or Key>." Press "P" to
enter a password. Press "K" to enter a key. If "P" is selected, the command prompt
changes to " Enter Password>." Enter a password. If "K" is selected, the command
prompt changes to "Enter Key>." Enter a key.
R
Set the encryption scheme.
Press "A." The command prompt changes to "Enter Privilege Type>." Press "D" to select
DES.
I
Set the SNMP manager.
Press "I." The command prompt changes to "Enter User IP address>." Enter an IP
address.
Q
Return to the previous menu.
54
Advertisement
Table of Contents
