Table of Contents
Advertisement
4.8.5.
Ping Execution
On the Switch Tools Configuration Menu, pressing "P" opens the Ping Execution
screen as shown in Fig. 4-85. On this screen, you can execute the ping command
from the Switching Hub to confirm communications with connected terminals and
other devices.
PN28248 Local Management System
Switch Tools Configuration -> Ping Execution
Target IP Address:
Number of Requests:
Timeout Value:
=============== Result ===============
-------------------------------- <COMMAND> -----------------------------------
Set Target [I]P Address
Set [N]umber of Requests
Set [T]imeout Value
Command>
Enter the character in square brackets to select option
Screen Description
Target IP Address
Number of Request
Timeout Value
Result
0.0.0.0
10
3 Sec.
Fig. 4-85 Ping Execution
Displays the IP address of the target of the ping.
The factory default setting is "0.0.0.0."
Displays the number of times of ping. The factory default setting is 10 times.
Displays the time before timeout occurs. The factory default setting is 3 sec-
onds.
Displays the ping result.
[E]xecute Ping
[S]top Ping
[Q]uit to previous menu
176
Advertisement
Table of Contents
