Table of Contents
Advertisement
Available commands are listed below.
S
Configure the status of Syslog transmission.
Press "S." The command prompt changes to " Enter manager entry number>." Enter a
Syslog server entry number between 1 and 2. The command prompt changes to "
Enable or Disable Server (E/D)>."
Press "E" to enable the server. Press "D" to disable it.
F
Set Facility.
Press "F." The command prompt changes to " Enter manager entry number>." Enter a
Syslog server entry number between 1 and 2. The command prompt changes to "
Enter Server Facility>." Enter a value of 0 to 7. (Local0 to Local7)
I
Set the IP address of Syslog server.
Press "I." The command prompt changes to " Enter manager entry number>." Enter a
Syslog server entry number between 1 and 2. The command prompt changes to "
Enter IP address for manager>." Enter the IP address of Syslog server.
Y
Sent information that is added to the system log to be transmitted.
Press "Y." The command prompt changes to " Enter manager entry number>." Enter
a Syslog server entry number between 1 and 2. The command prompt changes to "
Enter Include Information>." Press "S" to add the SysName. Press "I" to add the IP
address. Press "N" not to add the IP address.
C
Delete setting information of Syslog transmission.
Press "C." The command prompt changes to " Enter manager entry number>." Enter a
Syslog server entry number between 1 and 2. The command prompt changes to "
Clear Syslog Server information>." Press "Y" to delete the server information. Press
"N" not to delete it.
P
Set IPv6 Syslog Transmission settings.
Press "P." The IPv6 Syslog Transmission Menu opens. For configuration details, refer
to the next section (4.6.7.f).
Q
Return to the previous menu.
96
Advertisement
Table of Contents
