Panasonic Switch-M16eGi Operation Manual page 88

4.6.7.a. Telnet Access Limitation Configuration
On the System Security Configuration Menu, pressing "A" opens the Telnet
Access Limitation screen, as shown in Fig. 4-6-25. In this screen, you can
configure limitation of equipment accessing to this Switching Hub via
Telnet.
PN28160i Local Management System
System Security Configuration -> Telnet Access Limitation Menu
Telnet Access Limitation :
No. IP Address
--- ---------------
1 <empty>
2 <empty>
3 <empty>
4 <empty>
5 <empty>
-------------------------------- <COMMAND> -----------------------------------
[E]nable/Disable Telnet Access Limitation
[A]dd IP Address and Subnet Mask
[D]elete IP Address and Subnet Mask
[M]odify IP Address and Subnet Mask
[S]et IPv6 Access Limitation
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Fig. 4-6-25 Telnet Access Limitation Configuration
Disabled
Subnet Mask
---------------
<empty>
<empty>
<empty>
<empty>
<empty>
88