Available commands are listed below.
N
Show the next page.
Press "N." The screen shows the next page.
P
Show the previous page.
Press "P." The screen shows the previous page.
C
Create in-profile.
Press "C." The Create In-Profile Action Menu opens. Refer to the next section
(4.7.4.f).
Policed-DSCP
Policed-Precedence
Policed-CoS
D
Delete in-profile.
Press "D." The command prompt changes to "Enter in-profile action index>."
Enter an index number of the in-profile to be deleted.
M Modify in-profile.
Enter "M." The command prompt changes to "Enter in-profile action index>."
Enter an index number of the in-profile to be modified, and modify it using
the same operation as that for creating in-profile.
Q
Return to the previous menu.
Note: 1. Can set only one of the marking actions in In-Profile.
2. Can set precedence only in the case of IPv6.
Mark the DSCP value.
Mark the precedence value.
Mark the CoS value.
141