Panasonic Switch-M16eGi Operation Manual page 16

 Port LED display mode LED
In the status mode described later, port LED shows linkup and
communication status. By pressing the LED display switch button in the front
panel, the display mode of port LED can be changed as follows.
Port LED display mode
STATUS/ECO
GIGA
100M
FULL
LOOP HISTORY
 Port LED
According to switchover in the port LED display mode, described previously,
display of port LED in each port changes as follows.
Port LED Display mode
Left STATUS/ECO
GIGA
100M
FULL
LOOP HISTORY
Shows linkup and communication status.
Shows linkup status at 1000 Mbps.
Shows linkup status at 100 Mbps.
Shows linkup status at full-duplex or half-duplex.
Shows loop history and port shut-off status.
Behavior
Green Link is established.
Light
Green Transmitting and receiving data.
Blink
Off No device connected.
Green Link is established at 1000 Mbps.
Light
Off Link is established at 100 Mbps or 10
Mbps, or no device is connected.
Green Link is established at 100 Mbps.
Light
Off Link is established at 1000 Mbps or 10
Mbps, or no device is connected.
Green Link is established at full-duplex.
Light
Off Link is established at half-duplex or no
device is connected.
Green Within 3 days after loop removed.
Light
16
Description
Description