Digital Outputs - Kohler Decision-Maker 3000 Operation

2.6.11 Digital Outputs

Displays the selected programming user-defined digital
notice, warning, and shutdown outputs. These outputs
provide a multitude of choices for configuring
customized auxiliary outputs. See Figure 2-14 for a list
of digital output choices. For descriptions of the outputs
listed refer to the following:
D
2.3.5 System Fault Warning Lamp with Digital
Displays
D
2.3.6 System Fault Shutdown Lamp with Digital
Displays
D
2.3.7 Status and Notice Digital Displays
There is an optional 2 input/5 output (I/O) module board
available that can provide five additional digital outputs.
The displays for digital outputs appear as shown below
with Values true or false. Items shown in the display as
True are active.
D
DOut A1 (digital output A1) standard
D
DOut B1 (digital output B1) with I/O module board
D
DOut B2 (digital output B2) with I/O module board
D
DOut B3 (digital output B3) with I/O module board
D
DOut B4 (digital output B4) with I/O module board
D
DOut B5 (digital output B5) with I/O module board
Use SiteTecht software for digital output selection and
setup adjustments.
user-selectable function.
common fault, common warning, NFPA 110 alarm
active, or a specific warning or shutdown.
46 Section 2 Operation
Each output is tied to a
The function can be a
Digital Outputs
Digital ---->
Outputs
DOut A1
#####
DOut A1
Value: True or False
DOut B1
#####
DOut B1
Value: True or False
DOut B2
#####
DOut B2
Value: True or False
DOut B3
#####
DOut B3
Value: True or False
DOut B4
#####
DOut B4
Value: True or False
DOut B5
#####
DOut B5
Value: True or False
TP-6694 7/11