6.2 Accessory Connections
The controller contains a circuit board equipped with
terminal strip(s) for use in connecting external optional
accessories including alarms, battery chargers, and
remote switches. The optional I/O board provides an
additional two analog or digital inputs and five digital
outputs.
For specific information on accessory connections, refer
to the accessory wiring diagrams in the wiring diagram
manual and the instruction sheet accompanying the kit.
See Figure 6-25, Figure 6-26, and Figure 6-28 for
controller circuit board connections.
TP-6694 7/11
9
8
7
6
1. (4) push-on terminal connectors
2. TB2 4-position terminal block
3. TB3 6-position terminal block
4. P2 6-pin connector
5. P1 24-pin connector
6. TB1 6-position terminal block
7. P22 3-pin connector
8. P23 8-pin connector (RJ45)
9. P21 6-pin connector
Figure 6-25 Controller Circuit Board Connections
1
2
3
4
GM64345-C
5
Section 6 Accessories
81