Controller Logic Specifications; Status Event And Fault Specifications - Kohler Decision-Maker 3000 Operation

1. V7/V8/V9 fuses, 1.5 Amp. (qty. 3)
Figure 1-7 AC Circuit Fuses in Control Box
1
1. F1 1 Amp. auto-resettable
2. F2 1 Amp. auto-resettable
3. F3 12 Amp. non-replaceable
Figure 1-8 Controller DC Fuses
22 Section 1 Specifications and Features

1.3 Controller Logic Specifications

The controller logic specifications section is an overview
of the various features and functions of the controller.
Certain
accessories are connected. See Section 2, Operation,
for details.
The default selection time delays and digital outputs are
factory set and adjustable. Data entries require using a
PC and SiteTecht software.
software operation manual for details.
Inhibit Time Delay. The inhibit time delay is the time
period following crank disconnect during which the
1 generator set stabilizes and the controller does not
GM69407
detect a fault or status event. Select the desired inhibit
time delay from 0 to 60 seconds.
TIme Delay (Shutdown or Warning). The time delay
follows the inhibit time delay. The time delay is the time
period between when the controller first detects a fault or
status event and the controller warning or shutdown
lamp illuminates. The delay prevents nuisance alarms.
Select the desired time delay from 0 to 60 seconds.
1.3.1
2
The Factory-Defined Settings List contains all status
events and faults with ranges and time delays including
3
items that do not have user adjustments.
Note: The engine ECM may limit the crank cycle even if
GM64345-C
features function
Status Event and Fault
Specifications
the controller is set to a longer time period.
only when optional
See the SiteTecht
TP-6694 7/11