Lexmark MX617 User Manual page 163

Understanding the printer menus
Use
Automatically Observe DST
On
Off
Custom Time Zone Setup
DST Start Week
DST Start Day
DST Start Month
DST Start Time
DST End Week
DST End Day
DST End Month
DST End Time
DST Offset
Enable NTP
On
Off
NTP Server
Enable Authentication
On
Off
To
Set the printer to use the applicable daylight saving time (DST) start and end
times associated with the printer Time Zone setting.
Note: On is the factory default setting and uses the applicable Daylight
Saving Time associated with the Time Zone setting.
Enable the user to set up the time zone.
Enable Network Time Protocol, which synchronizes the clocks of devices on a
network.
Note: On is the factory default setting.
View the NTP server address.
Change the authentication setting to On or Off.
Note: Off is the factory default setting.
163