Lexmark MX617 User Manual page 149

Understanding the printer menus
Use
Network Mode
BSS Type
Infrastructure
Ad hoc
Compatibility
802.11b/g
802.11b/g/n
Choose Network
View Signal Quality
View Security Mode
AppleTalk menu
To access the menu, navigate to either of the following:
•
Network/Ports > Standard Network > Standard Network Setup > AppleTalk
•
Network/Ports > Network [x] > Network [x] Setup > AppleTalk
Use
Activate
Yes
No
View Name
View Address
Set Zone
[list of zones available on the
network]
To
Specify the network mode.
Notes:
•
Infrastructure is the factory default setting. This lets the printer
access a network using an access point.
•
Ad hoc configures a wireless connection directly between the
printer and a computer.
Specify the wireless standard for the wireless network.
Note: The 802.11b/g/n is the factory default setting.
Select an available network for the printer to use.
View the quality of the wireless connection.
View the encryption method for the wireless network.
To
Enable or disable AppleTalk support.
Note: No is the factory default setting.
Show the assigned AppleTalk name.
Note: The AppleTalk name can be changed only from the Embedded
Web Server.
Show the assigned AppleTalk address.
Note: The AppleTalk address can be changed only from the Embedded
Web Server.
Provide a list of AppleTalk zones available on the network.
Note: The default zone for the network is the factory default setting.
149