Lexmark MX617 User Manual page 148

Understanding the printer menus
IPv6 menu
To access the menu, navigate to any of the following:
•
Network/Ports menu > Standard Network > Standard Network Setup > IPv6
•
Network/Ports menu > Network [x] > Network [x] Setup > IPv6
Note: This menu is available only in network printers or printers that are attached to print servers.
Use
Enable IPv6
On
Off
Auto Configuration
On
Off
Set Hostname
View Address
View Router Address
Enable DHCPv6
On
Off
Wireless menu
Note: This menu is available only in printers connected to an Ethernet network and printers with a wireless
network adapter attached.
To access the menu, navigate to either of the following:
•
Network/Ports > Standard Network > Standard Network Setup > Wireless
•
Network/Ports > Network [x] > Network [x] Setup > Wireless
Use
Wi‑Fi Protected Setup (WPS)
Start Push Button Method
Start PIN Method
Enable/Disable WPS Auto‑detection
Enable
Disable
To
Enable IPv6 in the printer.
Note: On is the factory default setting.
Specify whether or not the network adapter accepts the automatic
IPv6 address configuration entries provided by a router.
Note: On is the factory default setting.
Set the host name.
Note: These settings can be changed only from the Embedded
Web Server.
Enable DHCPv6 in the printer.
Note: On is the factory default setting.
To
Establish a wireless network connection and enable network
security.
Notes:
•
Start Push Button Method connects the printer to a wireless
network when buttons on both the printer and the access point
(wireless router) are pressed within a given period of time.
•
Start PIN Method connects the printer to a wireless network
when a PIN on the printer is entered into the wireless settings
of the access point.
Automatically detect the connection method that an access point
with WPS uses—Start Push Button Method or Start PIN Method.
Note: Disable is the factory default setting.
148