Understanding The Scan Options - Lexmark MX617 User Manual

Scanning
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
3
Insert the flash drive into the USB port on the front of the printer.
Note: The USB Drive home screen appears.
4
Select the destination folder, and then touch Scan to USB drive.
Note: The printer goes back to the home screen after 30 seconds of inactivity.
5
Adjust the scan settings, and then touch Scan It.
Using the ScanBack Utility
You can use the Lexmark ScanBack
profiles. The ScanBack Utility can be downloaded from the Lexmark support Web site at
http://support.lexmark.com.
1
Set up your scan‑to‑computer profile:
a
Launch the ScanBack Utility.
b
Select the printer.
If no printers are listed, then contact your system support person, or click Setup to manually search for
an IP address or host name.
c
Follow the instructions on your computer screen to define the type of document being scanned and
what kind of output you want to create.
d
Assign a file name of your scan profile, and then specify a location on your computer.
e
Click Finish.
A dialog box appears with your scan profile information and the status of the received images.
Note: You can select Create Shortcut to create a shortcut of the scan profile settings to your desktop.
2
Scan your original documents:
a
Load all pages into the ADF or on the scanner glass.
b
From the printer control panel, navigate to:
Held jobs > Profiles and Apps > select your scan profile
Note: Your output file is saved in a directory or launched in the application you specified.

Understanding the scan options

FTP
This option lets you enter the IP address for the FTP destination.
Note: An IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
File Name
This option lets you type a file name for the scan image.
TM
Utility instead of the Embedded Web Server to create scan‑to‑computer
129