Lexmark MX617 User Manual page 161

Understanding the printer menus
Use
Delete Log
Yes
No
Configure Log
Enable Audit
Yes
No
Enable Remote Syslog
No
Yes
Remote Syslog Server
[256 character string]
Remote Syslog Port
1–65535
Remote Syslog Method
Normal UDP
Stunnel
Remote Syslog Facility
0–23
Log full behavior
Wrap over oldest entries
E‑mail log then delete all
entries
To
Specify whether audit logs are deleted.
Specify how audit logs are configured.
Notes:
•
Enable Audit determines if events are recorded in the secure audit log
and remote syslog. No is the factory default setting.
•
Enable Remote Syslog determines if logs are sent to a remote server. No
is the factory default setting.
•
Remote Syslog Server determines the value used to send logs to the
remote syslog server.
•
Remote Syslog Port identifies the port over which the printer transmits
logged events to a remote server.
•
Remote Syslog Method identifies the protocol used by the printer to
transmit logged events to a remote server. Normal UDP is the factory
default setting.
•
Remote Syslog Facility determines the Facility value that the printer uses
when sending events to the remote syslog server. 4 is the factory default
setting.
•
"Log full behavior" determines how the printer resolves if the log entirely
fills its allotted memory. "Wrap over oldest entries" is the factory default
setting.
161