Creating Shortcuts - Lexmark MX617 User Manual

Faxing
Sending a fax at a scheduled time
1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
3
From the home screen, navigate to:
Fax > enter the fax number > Delayed Send
Note: If Fax Mode is set to Fax Server, then the Delayed Send button will not appear. Faxes waiting for
transmission are listed in the fax queue.
4
Specify the time the fax will be transmitted, and then touch
The time is increased or decreased in 30‑minute increments.
5
Touch Fax It.
Note: The document is scanned and then faxed at the scheduled time.

Creating shortcuts

Creating a fax destination shortcut using the Embedded Web Server
Assign a shortcut number to a single fax number or a group of fax numbers.
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Settings > Manage Shortcuts > Fax Shortcut Setup.
Note: A password may be required. If you do not have an ID and password, then contact your system
support person.
3
Type a name for the shortcut, and then enter the fax number.
Notes:
•
To create a multiple‑number shortcut, enter the fax numbers for the group.
•
Separate each fax number in the group with a semicolon (;).
4
Assign a shortcut number.
Note: If you enter a number that is already in use, then you are prompted to select another number.
5
Click Add.
.
119