Filter - ATEN CN9000 User Manual

CN8600 User Manual
Lock Client PC – If this is enabled, after the allowed number of failures
have been exceeded, the computer attempting to log in is automatically
locked out. No logins from that computer will be accepted. The default is
enabled. This function relates to the client computer's IP. If the IP is
changed, the computer will no longer be locked out.
Lock Account – If this is enabled, after the allowed number of failures
have been exceeded, the user attempting to log in is automatically locked
out. No logins from the username and password that have failed will be
accepted. The default is enabled.
 Allowed - Sets the number of consecutive failed login attempts that are
permitted from a remote computer. The default is 5 times.
 Timeout - Sets the amount of time (in minutes) that a remote computer
must wait before attempting to login again after it has exceeded the
number of allowed failures. The default is 3 minutes.
Note: If you don't enable Login Failures, users can attempt to log in an
unlimited number of times with no restrictions. For security purposes,
we recommend that you enable this function and enable the lockout
policies.

Filter

IP and MAC Filters control access to the CN8600 based on the IP and/or MAC
addresses of the computers attempting to connect. A maximum of 100 IP filters
40