Hardware Setup; Connecting The Unit - ATEN US3312 User Manual

1. Please review the safety information regarding the placement of
this device in Safety Instructions, page 7.
2. To prevent damage to your installation from power surges or
static electricity. It is important that all connected devices are
properly grounded.

Connecting the Unit

Follow the steps below to connect the US3312 unit.
Mouse
1
Keyboard
Monitor
1. Connect the USB mouse, USB keyboard, and DisplayPort monitor into
their respective ports on the US3312.
Note: The USB Type-A ports can be used for USB peripheral sharing.
Connect the USB peripherals and the USB keyboard or USB mouse
into a USB hub, and then connect the USB hub into one of the USB
Type-A ports.
2. Connect the USB-C connectors of the attached KVM cables into their
respective ports on the USB-C devices that you are installing.
USB
USB
DP

Hardware Setup

USB
USB
Chapter 2
USB-C
Laptop
2
USB-C
Laptop
5