System Requirements; Remote User Computers; Servers - ATEN KN1132VB Series User Manual

KVM over IP User Manual

System Requirements

Remote User Computers

Remote user computers (also referred to as client computers) are the ones the
users log in to the switch with from remote locations over the Internet (see
Terminology, page xviii). The following equipment must be installed on these
computers:
 For best results, we recommend computers with at least a Pentium III 1+
GHz processor, with their screen resolution set to 1024 x 768.
 IE8 or above web browser.
 Browsers must support TLS 1.2 encryption.
 For best results, a network transfer speed of at least 512 kbps is
recommended.
 For the browser-based WinClient ActiveX Viewer, DirectX 8 must be
present, and at least 150 MB of memory must be available after
installation.
 For the browser-based Java Client Viewer the latest version of the Java
Runtime Environment (JRE) must be installed, and at least 205 MB of
memory must be available after installation.
 For the Windows Client AP, DirectX 8 must be present, and at least 90 MB
of memory must be available after installation.
 For the Java Client AP, the latest version of the Java Runtime Environment
(JRE) must be installed, and at least 145 MB of memory must be available
after installation.
 For the Log Server, you must have the Microsoft Jet OLEDB 4.0 or higher
driver installed.

Servers

Servers are the computers connected to the switch via KVM Adapter Cables
(see Terminology, page xviii). The following equipment must be installed on
these servers:
 A VGA, SVGA or multisync port.
 For USB KVM Adapter Cable Connections: a Type A USB port and USB
host controller.
 For PS/2 KVM Adapter Cable Connections: 6-pin Mini-DIN keyboard
and mouse ports.
10