Toshiba W7 DN-57442-006 Installation & Operation Manual page 84

Adjustable speed drives
Table of Contents

Advertisement

F162-F166
Direct Access Parameter Information
W7B ASD Installation & Operation Manual
FL Off Delay
Program  Terminal  Output Terminal Delays
This parameter delays the opening of the FL output terminals by the
programmed value (see waveforms at F160).
The delay may be increased to allow the devices that are connected to
FL to respond.
OUT4 Off Delay
Program  Terminal  Output Terminal Delays
This parameter delays the opening of the OUT4 output terminals by the
programmed value (see waveforms at F160).
The delay may be increased to allow the devices that are connected to
OUT4 to respond.
OUT5 Off Delay
Program  Terminal  Output Terminal Delays
This parameter delays the opening of the OUT5 output terminals by the
programmed value (see waveforms at F160).
The delay may be increased to allow the devices that are connected to
OUT5 to respond.
OUT6 Off Delay
Program  Terminal  Output Terminal Delays
This parameter delays the opening of the OUT6 output terminals by the
programmed value (see waveforms at F160).
The delay may be increased to allow the devices that are connected to
OUT6 to respond.
OUT7 Off Delay
Program  Terminal  Output Terminal Delays
This parameter delays the opening of the OUT7 output terminals by the
programmed value (see waveforms at F160).
The delay may be increased to allow the devices that are connected to
OUT7 to respond.
74
Direct Access Number — F162
Parameter Type — Numerical
Factory Default — 2.0
Changeable During Run — No
Minimum — 2.0
Maximum — 200.0
Units — mS
Direct Access Number — F163
Parameter Type — Numerical
Factory Default — 2.0
Changeable During Run — No
Minimum — 2.0
Maximum — 200.0
Units — mS
Direct Access Number — F164
Parameter Type — Numerical
Factory Default — 2.0
Changeable During Run — No
Minimum — 2.0
Maximum — 200.0
Units — mS
Direct Access Number — F165
Parameter Type — Numerical
Factory Default — 2.0
Changeable During Run — No
Minimum — 2.0
Maximum — 200.0
Units — mS
Direct Access Number — F166
Parameter Type — Numerical
Factory Default — 2.0
Changeable During Run — No
Minimum — 2.0
Maximum — 200.0
Units — mS
https://www.toshiba.com/tic/

Advertisement

Table of Contents
loading

Table of Contents