Table of Contents
Advertisement
General Safety Information
DO NOT attempt to install, operate, maintain, or
dispose of this equipment until you have read and
understood all of the product safety information and
directions that are contained in this manual.
Safety Alert Symbol
The Safety Alert Symbol is comprised of an
equilateral triangle enclosing an exclamation
mark. This indicates that a potential personal
injury hazard exists.
Signal Words
Listed below are the signal words that are used
throughout this manual followed by their
descriptions and associated symbols. When the
words DANGER, WARNING, and CAUTION are
used in this manual, they will be followed by
important safety information that must be carefully
followed.
DANGER
The word DANGER
preceded by the safety
alert symbol indicates that an imminently
hazardous situation exists that, if not avoided or if
instructions are not followed precisely, will result in
serious injury to personnel or loss of life.
WARNING
alert symbol indicates that a potentially hazardous
situation exists that, if not avoided or if instructions
are not followed precisely, could result in serious
injury to personnel or loss of life.
CAUTION
alert symbol indicates that a potentially hazardous
situation exists that, if not avoided or if instructions
are not followed precisely, may result in minor or
moderate injury.
CAUTION
symbol indicates a potentially hazardous situation
exists that, if not avoided or if instructions are not
followed precisely, may result in equipment and
property damage.
https://www.toshiba.com/tic/
W7B ASD Installation & Operation Manual
The word WARNING
preceded by the safety
The word CAUTION
preceded by the safety
The word CAUTION
without the safety alert
Safety Information and Precautions
Special Symbols
To identify special hazards, other symbols may
appear in conjunction with the DANGER,
WARNING, and CAUTION signal words. These
symbols indicate areas that require special and/or
strict adherence to the procedures to prevent
serious injury to personnel or loss of life.
Electrical Hazard Symbol
A symbol that is comprised of an equilateral
triangle enclosing a lightning bolt indicates a
hazard of injury from electrical shock or burn.
Explosion Hazard Symbol
A symbol that is comprised of an equilateral
triangle enclosing an explosion indicates a
hazard of injury from exploding parts.
Equipment Warning Labels
DO NOT attempt to install, operate, perform
maintenance, or dispose of this equipment until you
have read and understood all of the product labels
and user directions that are contained in this
manual.
Warning labels that are attached to the equipment
will include the exclamation mark within a triangle.
DO NOT remove or cover any of these labels. If the
labels are damaged or if additional labels are
required, contact the TIC Customer Support Center
for additional labels.
Labels attached to the equipment are there to
provide useful information or to indicate an
imminently hazardous situation that may result in
serious injury, severe property and equipment
damage, or loss of life if safe procedures or
methods are not followed as outlined in this
manual.
Danger Safety Alert Symbol
The word DANGER preceded by
DANGER
the safety alert symbol indicates
that an imminently hazardous
HAZARDOUS VOLTAGE
- Ground equipment
situation exists that, if not
- Before servicing:
- Remove all power
avoided, will result in serious
- Wait 10 minutes
injury to personnel or loss of life.
- Verify no voltage is present
- Close panel after servicing
Failure to comply will result
in death or serious injury
1
Advertisement
Table of Contents
