Display Units
10. Display Units
Wizard
11. Wizard Finished!
Finished!
https://www.toshiba.com/tic/
W7B ASD Installation & Operation Manual
This screen sets the display units for current and voltage.
Settings:
0 — %
1 — A/V (Amp/Volt)
This screen is the final screen of the Startup Wizard. The basic parameters of
the W7B ASD have been set. Click Exit to load the Startup Wizard input and to
return to the Frequency Command screen. Additional application-specific pro-
gramming may be required.
Startup Wizard
49