Backrest (If Equipped); Passenger Seat (1+1) (If Equipped) - BRP Lynx REV-XU Series Operator's Manual

mmo2007-009-066_m
Push and hold the SET (S) button within
5 seconds to reset.
mmo2007-009-066_w
Gauge Setup
Clock Setting
NOTE: This clock diplays in the
24-hour format only.
Press the SET (S) button to select clock
mode.
mmo2007-009-066_p
1. Clock mode
Press and hold the SET (S) button to ac-
tivate clock set-up.
CONTROLS, INSTRUMENTS AND EQUIPMENT
mmo2007-009-066_k
To change HOURS, while the value of
HOURS is blinking, use the SET (S) but-
ton to change hours.
To change MINUTES, while the value
of HOURS is blinking, press the MODE
(M) button to switch to minutes. Use
the SET (S) button to change minutes.
Press the MODE (M) button to save
clock set-up and exit mode.
Unit Selection (KM/H vs MPH)
The units can be set in metric or imperi-
als. Refer to an authorized Lynx dealer.
Language Selection
The gauge display language can be
changed. Refer to an authorized Lynx
dealer for language availability and
setup the gauge to your preference.

13) Backrest (If Equipped)

A fixed backrest is installed on the pas-
senger seat.
14) Passenger Seat (1+1)
(If Equipped)
Any passenger must be able to
firmly lay his feet on the footrests
and keep his hands on the grab
handles at all times when seated.
Respecting those physical crite-
ria is important to ensures that the
passenger is stable and to reduce
the risks of ejection.
_______________
WARNING
61