BRP Lynx REV-XU Series Operator's Manual page 39

Table of Contents

Advertisement

IMPORTANT ON-PRODUCT LABELS
516005876
LABEL 2
NOTICE
Drive pulley bolt recommended torque
85-92 lbf·ft / 115-125N·m
Not applying the recommended torque may result in a major failure of the drive
pulley and the engine.Refer to the shop manual for the complete assembly procedure
EN-516005503A-DEC
ON PULLEY GUARD - LABEL 3
516003925
LABEL 4
516003918
LABEL 5
_______
36
516005109
COMMANDER GT (COMFORT KIT) AND
69 RANGER SNOWCRUISE MODELS - ON
PASSENGER HANDHOLD
and validated using the BRP XPS
engine may not be covered by the BRP limited warranty.
516007443
2-TEC- MODELS - ON ENGINE
COMPARTMENT
SAFETY INFORMATION
The engine of this snowmobile has been developed
BRP recommends the use of its XPS
lubricant or equivalent.
Damages caused by oil which is not suitable for this
See the operator' s guide.
________
approved lubricant.
TM
TM
approved
516007443

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lynx commander 600 e-tecLynx commander limited 600 e-tecLynx commander 800r e-tecLynx commander 900 aceLynx commander gt 900 aceLynx commander gt 1200 4-tec comfort ... Show all

Table of Contents