Battery Display / Charging Plug; Electronic Controlled Suspension (Ecs2.1) (If Applicable); Controls, Instruments And Equipment (Cont'd) - BRP LYNX Commander 800R E-TEC Touratech Operator's Manual

CONTROLS, INSTRUMENTS AND EQUIPMENT
mmo2007-009-044_b
HEATING INTENSITY DISPLAY
1. Colder (Less heat)
2. Warmer (More heat)
Heated throttle lever will be in OFF po-
sition when there are no bars displayed
on the gauge.
Mode/Set Button
This button can be used instead of the
two buttons on top of the analog/digital
gauge to facilitate gauge adjustments.
– When pressed left, it has the same
functions as the MODE (M) button.
– When pressed right, it has the same
functions as the SET (S) button.
fmo2014-003-003_d
MULTIFUNCTION GAUGE
1. MODE function
2. SET function
______________
40
9) Battery display /
Charging plug
Battery display / Charging plug is lo-
cated to the LH side of console.
The charging level is displayed with
LEDs.
fmo2016-003-001_b
1. Battery Display/Charging plug
10) Electronic Controlled
Suspension (ECS
Applicable)
The operator can adjust the comfort
and ride height by Electronic Con-
trolled Suspension (ECS
fmo2016-002-003_c
1. ECS 2.1 module
REAR SUSPENSION ADJUST-
Refer to
MENT TUNE YOUR RIDE
in the
tion
2.1 ) (If
2.1 ).
sec-