Suspension - BRP Lynx REV-XU Series Operator's Manual

A05F0EB
TYPICAL
1. Locknut
2. Retaining bolts
6. Start engine and rotate track slowly
to recheck alignment.
7. Reposition snowmobile on ground.
8. Install rear wheel caps if so
equipped.

Suspension

Rear Suspension Condition
Visually inspect all suspension compo-
nents including slider shoes, springs,
wheels, etc.
NOTE: During normal driving, snow
will act as a lubricant and coolant for
the slider shoes. Extensive riding on
ice or sanded snow, will create exces-
sive heat build-up and cause prema-
ture slider shoe wear.
Suspension Stopper Strap
Condition
Inspect stopper strap for wear and
cracks, bolt and nut for tightness. If
loose inspect holes for deformation.
Replace as required. Tighten nut to
specification.
TIGHTENING TORQUE
Stopper strap nut
1
2
9 N•m ± 1 N•m
(80 lbf•in ± 9 lbf•in)
______________
MAINTENANCE PROCEDURES
Rear Suspension Lubrication
Lubricate rear suspension at grease
fittings. Refer to
SCHEDULE
for
quency.
SUSPENSION GREASE
BRP
recommended
product
E E asyRide Suspension
619900696-004
619900696-005
MAINTENANCE
maintenance fre-
SYNTHETIC
SUSPENSION
GREASE
(P/N 779163)
121