Lower Side Panels - BRP Lynx REV-XU Series Operator's Manual

Table of Contents

Advertisement

2. Hook the panel top center tabs to
the console.
mmo2011-006-100_a
1. Console hook
2. Console slot
3. Panel center tabs
3. Insert the rear tab into the console
slot.
mmo2009-004-041_a
1. Rear tab
2. Console slot
4. Hook rubber tie.

29) Lower Side Panels

WARNING
Never operate engine with side
panels opened or removed from
vehicle.
Lower Side Panel Opening
1. Remove upper side panel as ex-
plained above.
2. Unhook the rubber tie.
CONTROLS, INSTRUMENTS AND EQUIPMENT
mmo2009-004-044_a
1. Rubber tie
3. Turn the clip 1/4 turn counterclock-
wise to unlock.
mmo2009-004-045_a
1. Clip
4. Slightly lift the rear of side panel,
then open sideways.
Lower Side Panel Closing
1. Insert the panel tab into the bottom
pan slot.
mmo2011-006-101_a
1. Lower side panel tab
2. Bottom pan slot
_______________
69

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lynx commander 600 e-tecLynx commander limited 600 e-tecLynx commander 800r e-tecLynx commander 900 aceLynx commander gt 900 aceLynx commander gt 1200 4-tec comfort ... Show all

Table of Contents