Skis; Fuses And Relays - BRP Lynx REV-XU Series Operator's Manual

MAINTENANCE PROCEDURES
All others
fmo2015-003-008_a
1. Grease fittings
Steering and Front Suspension
Condition
Visually inspect steering and front sus-
pension for tightness of components
(steering arms, control arms and links,
tie rods, ball joints, ski bolts, ski legs,
etc.). If necessary, contact an autho-
rized Lynx dealer.

Skis

Wear and Condition of Skis and
Runners
Check the condition of the skis and ski
runner carbides. If worn, contact an
authorized Lynx dealer.
WARNING
Excessively worn skis and/or ski
runners will adversely affect snow-
mobile control.
Blade Ski
NOTE: The XC is not adjustable.
Standard position for Ski is that Ski run-
ner is installed on center holes.
______________
122
fbl2013-002-014_c
TYPICAL
1. Ski leg
2. Ski
3. Ski Runner
Ski stance can be adjusted by spacer
location. It can be installed inside or
outside of the ski leg
fmo2014-003-009_a
1. Spacer on inside of ski leg

Fuses and Relays

Fuse Inspection
The electrical system is protected with
fuses.
Check fuse condition and replace it if
necessary.
To remove fuse from the fuse box, pull
fuse out. Check if filament is melted.
A15E0KA
1. Fuse
2. Check if melted
1
2