Rear Suspension Adjustment - BRP Lynx REV-XU Series Operator's Manual

TUNE YOUR RIDE
Rear Suspension
Adjustment
NOTICE
Whenever adjusting rear
suspension, check track tension and
adjust as necessary.
fmo2015-003-003_a
TYPICAL - PPS-5900A AND PPS-6900A REAR
SUSPENSION
1. Rear spring
2. Center spring
3. Stopper strap
fmo2015-003-002_a
PPS-5900A REAR SUSPENSION WITH ECS2
1. Rear spring with ECS2
2. Center spring
3. Stopper strap
fmo2016-006-001_a
PPS-6900-F2 REAR SUSPENSION
1. Rear spring
2. Center spring
3. Stopper strap
______________
86
619900696-001
EASYRIDE REAR SUSPENSION
1. Easy Adjust Handle
2. Rear spring
3. Center spring
4. Stopper strap
Stopper Strap
Ride at low speed then fully accelerate.
Note steering behavior.
Adjust stopper strap length accord-
ingly.
NOTICE
Whenever stopper strap
length is changed, track tension
must be readjusted.
REFERENCE TABLE
WEIGHT
TRANSFER
(SKI PRESSURE)
Comfortable: good
weight transfer
(light pressure)
Light: too much
weight transfer
(lift off the ground)
Heavy: not enough
weight transfer
(heavy pressure)
Increase or decrease strap length by
bolting to a different hole.
WHAT TO DO
No adjustment
required
Strap too long,
reduce strap
length
Strap too short,
increase strap
length