BRP Lynx REV-XU Series Operator's Manual page 104

Table of Contents

Advertisement

Replace fuel filter
FUEL
SYSTEM
Replace fuel pump outlet filter (ACE)
Replace drive pulley slider shoes, O-ring and rollers and inspect ramps
(1200 4-TEC and 900 ACE)
DRIVE
Replace brake fluid
SYSTEM AND
BRAKE
Lubricate the splines of joint between QRS axle and gearbox
Lubricate the splines of joint between driven pulley and QRS axle
Retighten rear member screws to frame to specified torque (XU)
FRAME
24 N•m (18 lbf•ft)
ELECTRICAL
Replace spark plugs
SYSTEM
Check valve clearance and adjust if necessary. (1200 4-TEC)
ENGINE
Replace engine coolant
ENGINE
EVERY 6 000 KM (4,000 MI) OR 2 YEARS
(WHICHEVER COMES FIRST)
EVERY 10 000 KM (6,000 MI) OR 3 YEARS
(WHICHEVER COMES FIRST)
EVERY 20 000 KM (12,500 MI)
EVERY 5 YEARS
______________
MAINTENANCE SCHEDULE (4-STROKE)
101

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lynx commander 600 e-tecLynx commander limited 600 e-tecLynx commander 800r e-tecLynx commander 900 aceLynx commander gt 900 aceLynx commander gt 1200 4-tec comfort ... Show all

Table of Contents