Gearshift Lever; Adjustable Mirrors; Tool Kit - BRP Lynx REV-XU Series Operator's Manual

Mode/Set Button
This button can be used instead of the
two buttons on top of the analog/digital
gauge to facilitate gauge adjustments.
– When pressed left, it has the same
functions as the MODE (M) button.
– When pressed right, it has the same
functions as the SET (S) button.
fmo2014-003-003_d
MULTIFUNCTION GAUGE
1. MODE function
2. SET function

8) Gearshift Lever

Use this lever to select gears. The
gearbox has two forward gears, a re-
verse gear and a neutral.
GEARBOX OPERATION
Refer to
OPERATING INSTRUCTIONS
tails.
NOTE: It is necessary to push shift
lever knob down to move it from neu-
tral to reverse gear.
NOTE: Do not shift when vehicle is
moving.

9) Adjustable Mirrors

Each mirror can be adjusted to suit
driver's preference by gently rotating
the mirror glass.
CONTROLS, INSTRUMENTS AND EQUIPMENT
Adjust with vehicle at rest in a safe
place.

10) Tool Kit

Models without an Under Seat
Storage Box
A tool kit containing tools for basic
maintenance is supplied with the vehi-
cle.
The tool kit support is located in engine
compartment on pulley guard.
NOTICE
erly secured to avoid contact with
belt or pulley.
To remove the tool kit support from
the pulley guard, unlock the tab from
underneath the pulley guard and pull
the tool kit support towards front to
release it.
in
for de-
fmo2012-003-008_a
TYPICAL
1. Tool kit
_______________
WARNING
Make sure tool kit is prop-
49