Vehicle Care; Post-Operation Care; Vehicle Cleaning And Protection - BRP Lynx REV-XU Series Operator's Manual

VEHICLE CARE

Post-Operation Care

Remove snow and ice from rear sus-
pension, track,
steering mechanism and skis.
WARNING
Make sure tether cord cap is away
from engine cut-off switch before
standing in front the vehicle, get-
ting close to the track or rear sus-
pension components.
Always cover your snowmobile when
leaving it outside overnight or during
extended periods of inactivity. This
will protect it from frost and snow as
well as help retain its appearance.
Vehicle Cleaning and
Protection
Remove any dirt or rust.
To clean the entire vehicle, use only mi-
crofiber cloths or equivalent.
NOTICE
It is necessary to use
microfiber cloths
on windshield and hood to avoid
scratching the surfaces.
To remove grease, oil and grime, use
BRP HEAVY DUTY CLEANER (P/N 293
110 001).
NOTICE
Do not use heavy duty
cleaner on decals or vinyl.
To remove stubborn dirt from all plastic
and vinyl surfaces, use CLEANER AND
DEGREASER PRO C1 (P/N 779262).
NOTICE
Never clean plastic parts
or hood with strong detergent, de-
greasing agent, paint thinner, ace-
tone, products containing chlorine,
etc.
Wax painted portion of the vehicle for
better protection.
NOTE: Apply wax on glossy finish
only.
front suspension,
or equivalent
______________
125