BRP Lynx REV-XU Series Operator's Manual page 127

MAINTENANCE PROCEDURES
mmo2007-009-022_a
1. Rubber boots
4. Press and pull both sides of the re-
taining clip at the same time to re-
lease it from bulb support.
mmo2007-009-063_a
Step 1: Push both sides
Step 2: Pull to release
1. Retaining clip
5. Pull bulb and replace. Properly rein-
stall parts.
mmo2007-009-064_a
PULL BULB AND REPLACE
Headlights Beam Aiming
Remove multifunction gauge, refer to
HEADLIGHTS BULB REPLACEMENT
Turn knob to adjust beam height.
______________
124
mmo2007-009-023_a
TYPICAL
1. Knobs
Taillight
The taillight is comprised of a LED as-
sembly which is proven to be reliable
and durable.
In the event of a failure, the taillight will
have to be replaced as an assembly.
.