Gearshift Lever; Mountain Strap - BRP LYNX Commander 800R E-TEC Touratech Operator's Manual

mmo2007-009-066_m
Push and hold the SET (S) button within
5 seconds to reset.
mmo2007-009-066_w
Gauge Setup
Clock Setting
NOTE: This clock diplays in the
24-hour format only.
Press the SET (S) button to select clock
mode.
mmo2007-009-066_p
1. Clock mode
Press and hold the SET (S) button to ac-
tivate clock set-up.
CONTROLS, INSTRUMENTS AND EQUIPMENT
mmo2007-009-066_k
To change HOURS, while the value of
HOURS is blinking, use the SET (S) but-
ton to change hours.
To change MINUTES, while the value
of HOURS is blinking, press the MODE
(M) button to switch to minutes. Use
the SET (S) button to change minutes.
Press the MODE (M) button to save
clock set-up and exit mode.
Unit Selection (KM/H vs MPH)
The units can be set in metric or imperi-
als. Refer to an authorized Lynx dealer.
Language Selection
The gauge display language can be
changed. Refer to an authorized Lynx
dealer for language availability and
setup the gauge to your preference.

12) Gearshift Lever

Use this lever to select gears. The
gearbox has two forward gears, a re-
verse gear and a neutral.
Refer to
OPERATING INSTRUCTIONS
tails.
NOTE: It is necessary to push shift
lever knob down to move it from neu-
tral to reverse gear.
NOTE: Do not shift when vehicle is
moving.

13) Mountain Strap

Mountain strap provides a grip for the
driver when side-hilling.
_______________
GEARBOX OPERATION
in
for de-
51