3D Histech Pannoramic MIDI II 2.0.5 User Manual page 98

Pannoramic MIDI II 2.0.5 User's Guide
5.3.5 Table view mode
By clicking
Click to assign profile to a slide, and
than one profile assigned to it, and these profiles can either be BF or FL if the scanner is capable to
operate in these two scanning modes.
In Table view the following information are displayed in the profile strip based on the loaded profile:
Profile name
•
Illumination
•
Priority
•
Objective type
•
Filters
•
Progress
•
Scan properties: The location of the virtual slide with the selected profile can be defined
•
Scan result
◦
Scan duration
◦
Scanned FOVs
◦
Total no. of FOVs
◦
Profile editor for Scheduler
•
December 7, 2018 – Rev. 1
each slide will be displayed in a separate row.
Figure 75 – Table view mode
to detach a profile from a slide. A slide can have more
3DHISTECH Ltd.
5.3.5 Table view mode
98(144)