3D Histech Pannoramic MIDI II 2.0.5 User Manual page 72

Pannoramic MIDI II 2.0.5 User's Guide
Image Correction settings
Use Flatfield correction – If this function is active the scanned slide compensates itself with a
•
special method (light intensity statistical data, not to modify the average intensity of the
slide. Quantitative measurements can be made on the slide. The following three options can
be selected from the drop-down list:
Intensity statistics – legacy compensation algorithm
◦
Reduce intensity – pixel-level analyzation of the acquired image during which the
◦
background of the image is reduced based on the comparison of the image recorded by
the camera and the compensation image.
Intensity equalization – pixel-level analyzation of the acquired image, a one-by-one type
◦
image compensation method is applied.
Extended focus – Select the type of the extended focus algorithm used during scanning:
•
Legacy – uses original extended focus algorithm, it is recommended for wide-field
◦
fluorescence scanning.
Maxima – the final image is made up from all of the layers created, areas (pixel groups)
◦
with the highest intensity are combined together.
AVG – an average of the layers is used for the final image.
◦
Max-AVG – the final image is made up from all of the layers created, areas (pixel groups)
◦
with higher intensity than the average are combined together.
Image settings
Choose one of the following predefined image formats (and a subsequent custom option) from the
Image Quality drop-down list:
Excellent (JPEG: 90)
•
Good (JPEG: 80)
•
Medium (JPEG: 60)
•
Low (JPEG: 30)
•
Custom... – If choosing this option, the Image compression setting is displayed on which you
•
can select from different image formats. Accordingly, further adjustments can be made,
except if PNG or BMP image format is selected.
December 7, 2018 – Rev. 1 3DHISTECH Ltd.
5.2.1 Profile Settings panel
72(144)