Pannoramic MIDI II 2.0.5 User's Guide
5.3.2 General functions at the tray menu
Rack view mode selector
Switch view by clicking this button. Click
virtual tray from the planner.
Profile management for selected magazine menu includes the following global settings
applicable to all trays:
Add current profile for all slides
•
Open profile to all slides
•
Detach current profile from all slides
•
Detach profiles from slides
•
Clear all slide results
•
5.3.3 General functions at the slide menu
Mark empty slide positions – Define range in the Empty slide range boxes to set multiple
•
slide positions as empty. For single slides, enter / set slide position with the arrows in the
Empty single slide box or right-click on a slide and select Mark as empty.
Click Reset empty definitions to cancel slide selections as empty, or right-click the slide
•
selected as empty and click Reset.
You can apply a selected profile to a defined range of slides at the Profile range section. Set
•
the slide positions within the range (first and last slide) then click
December 7, 2018 – Rev. 1
to add a virtual tray to the planner, and
Figure 72 – General functions at the slide menu
3DHISTECH Ltd.
5.3.2 General functions at the tray menu
.
to remove a
95(144)