3D Histech Pannoramic MIDI II 2.0.5 User Manual page 56

Pannoramic MIDI II 2.0.5 User's Guide
Preview Toolbar
This section is located at the bottom of the preview image.
Save scanmap
•
Position
•
sample and then click on the area of interest on the preview image.
This will define the Live image that you can access from the Live view
Union
•
shape selected in the Preview Toolbar. This area will not be scanned.
Erase
•
selected shape from the Preview Toolbar. This area will not be scanned.
Edit
•
or corners.
December 7, 2018 – Rev. 1
– Click this icon to save the currently selected areas to scanmap.
– To position the specimen holder that holds the current slide, click Position
– Add the selected areas to the preview. Mark area for scanning based on the
– Delete selected areas from the preview image. Deselection is made based on the
Figure 28 – Not scanned selection
– The size of selected area (positive or negative) can be modified at the borderlines
Figure 29 – Edited negative and positive selection masks.
3DHISTECH Ltd.
5.1.2 Microscope Control Panel
.
56(144)