Microscope Control Panel - 3D Histech Pannoramic MIDI II 2.0.5 User Manual

Pannoramic MIDI II 2.0.5 User's Guide

5.2.2 Microscope Control Panel

5.2.2.1 Preview window
Click to open the Preview panel that offers options for threshold setting and selection of the
area to be scanned.
Threshold options
This section is located at right side of the preview window. Scanmap Source is designed to set which
type of scanmap is used on the preview image. This scanmap is displayed automatically in the Profile
Scanmap Source setting. Selectable scanmap types are the following:
Use threshold
•
Load previously saved scanmap from file
•
Custom scan map
•
December 7, 2018 – Rev. 1
Figure 45 – Pre-scan preview image
3DHISTECH Ltd.
5.2.2 Microscope Control Panel
74(144)