3D Histech Pannoramic MIDI II 2.0.5 User Manual page 130

Pannoramic MIDI II 2.0.5 User's Guide
1. Push protective covers apart (see section
2. Move clamp (1) to the left, so the slide could be easily removed.
3. While holding the clamp pushed to the left, remove the slide (2) carefully.
If the slide is broken, make sure to remove all pieces completely from the
device. The edge of the broken area of the slide is sharp and it can lead to
injury and contagion! Broken slide can be removed only by a well-trained
person!
4. Push protective covers together again (see section
5. Launch control software.
December 7, 2018 - Rev. 1
Figure 80 – Removing a slide
Caution!
3DHISTECH Ltd.
7 Troubleshooting and Maintenance
7.3.1 Opening the protective
7.3.1 Opening the protective
covers).
covers).
130(144)