3D Histech Pannoramic MIDI II 2.0.5 User Manual page 114

Pannoramic MIDI II 2.0.5 User's Guide
On this panel you can define which filters occupy which turret positions.
Select filter hardware positions from the drop-down list
◦
Move filter wheel to insert position
◦
Enable position
◦
Whenever a selected physical filter is disabled, the filter itself must be
removed from the turret.
Select Filter type, Filter channel, and Filter name
◦
Check Available for scanning
◦
Set Lumencor LED light source, set Excitation and Emission wavelength / bandwidth
◦
values for the selected filter.
Set Pseudo-color
◦
Select channels used for grayscale conversion
◦
Select Enable Lumencor hardware trigger
◦
Click Save to save settings.
– Z-difference
•
This function is available only for fluorescence settings; it enables you to set the basic focus
differences between the filters. This facilitates more precise focusing during scanning.
December 7, 2018 – Rev. 1
Note:
3DHISTECH Ltd.
5.6.2 Services
114(144)