Declaration Of Conformity - 3D Histech Pannoramic MIDI II 2.0.5 User Manual

Pannoramic MIDI II 2.0.5 User's Guide

Declaration Of Conformity

3DHISTECH Ltd. declares that the product Pannoramic MIDI II slide scanner is designed and produced
with consideration of specified requirements according to the IEC 61326-2-6:2005 standard, and
conforms to the directives and other standards listed below:
IEC 61010-1:2001, "Safety Requirements for Electrical Equipment for Measurement, Control, and
Laboratory Use - Part 1: General Requirements"
IEC 61010-2-101:2002, " Safety Requirements for Electrical Equipment for Measurement, Control,
and Laboratory Use – Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical
equipment"
UL 61010-1:2004 R10.08, "Safety Requirements for Electrical Equipment for Measurement, Control,
and Laboratory Use - Part 1: General Requirements"
Conformity with Directive IEC 61010-2-101 is marked by
There is no further operator (user) action required in case of residual risks.
Further information may be obtained from the manufacturer:
3DHISTECH Ltd.
3 Öv street
1141 Budapest – HUNGARY
December 7, 2018 – Rev. 1 3DHISTECH Ltd.
on the product labeling.
7(144)