General Functions At The Main Menu - 3D Histech Pannoramic MIDI II 2.0.5 User Manual

Pannoramic MIDI II 2.0.5 User's Guide

5.3.1 General functions at the main menu

Microscope/Planner selector
Horizontal/Vertical selector (Available in Slide view with card mode)
Stage Control – Available after initialization, upon clicking the slide icon or entering slide
position number at the right side, the slide can be loaded.
Scan to – Available after loading procedure, unique settings can be defined even for each
separate scanning.
Start scan – Scanning of the actually loaded slide, or if the planner has been defined, the
whole scanning process can be initiated.
Stop scan
Stop actual process
Take all previews – Preview images of all the slides on the tray are taken automatically. Select
the required preview type from the following (from top to bottom): Brightfield, Pre-scan, Pre-scan
high-resolution, Pre-scan + high-resolution.
Load / Save Plan menu – Opens a drop-down menu including the following:
Load plan – The previously saved scanning plan can be loaded.
•
Save plan – A scanning plan containing all parameters and profile assignment will be saved.
•
Load CSV – Rack number, slide position, slide name, profile name, illumination type data
•
from a CSV file can be loaded.
Save CSV – Rack number, slide position, slide name, profile name, illumination type data can
•
be saved to a CSV file.
December 7, 2018 – Rev. 1
Figure 70 – Take all preview selector
3DHISTECH Ltd.
5.3.1 General functions at the main menu
93(144)