3D Histech Pannoramic MIDI II 2.0.5 User Manual page 28

Pannoramic MIDI II 2.0.5 User's Guide
Do NOT scratch any circular marker onto the glass surface of a slide,
use a soft tip pen instead for marking area of interest.
The distance between slide edges and the edges of the mounted
coverslip should be 1-2 mm, and they should be parallel with each
other.
Fluorescent signals become more easily detectable for the scanner,
therefore resulting in a brighter and better image, by treating the slide
with a formula that prevents rapid photobleaching of fluorescent
reagents (e.g. VECTASHIELD® Fluorescent Mounting Medium by Vector
Laboratories and ProLong® Gold and SlowFade® Gold antifade reagents
by Invitrogen) during the FISH protocol.
For further information, see the homepages of the manufacturers:
http://www.vectorlabs.com/
December 7, 2018 – Rev. 1
Caution!
Note:
Note:
and http://www.invitrogen.com.
3DHISTECH Ltd.
3 Preparing Slides and Trays
28(144)