3D Histech Pannoramic MIDI II 2.0.5 User Manual page 104

Pannoramic MIDI II 2.0.5 User's Guide
Live mode
Rendered – live image is displayed in an embedded window
◦
External legacy – live image is displayed in an external window
◦
Screenshot folder – Set the folder for storing screenshots by clicking Browse. Otherwise
◦
the C:\Users\<Username>\Pictures folder is used by default.
Slide settings
Unload slide after FL grabbing
◦
Slide label anonymity – Slide label area is displayed as a clear white image during
◦
scanning, patient data will not be visible in CaseViewer.
Do not save label to slide – The original label area is not saved to the slide, and will not
◦
be visible in CaseViewer.
Calculate exposure time for barcode grabbing – Three images are recorded for barcode
◦
image creation. Exposure times will be recalculated each time, thus creating prefect light
conditions for barcode reading, so to make sure that barcode identification is successful.
Rotate barcode image by 180° degrees.
◦
Unload slide after planner scan
◦
Scanning History
Hardware log
◦
Scanner hardware operations are contained in this log. To enable this function, first the
database from the following folder must be loaded:
C:\ProgramData\3DHISTECH\SlideScanner\HWLogDataBase
The following motor movements are recorded in the log list:
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
December 7, 2018 – Rev. 1
Camera Changer
DFP Light
Filter Wheel
General
Halogen Light
Microscope Part
MIDI Loader
ND
Objective Changer
Preview Light
3DHISTECH Ltd.
5.6.1 Settings
104(144)