3D Histech Pannoramic MIDI II 2.0.5 User Manual page 106

Pannoramic MIDI II 2.0.5 User's Guide
– Basic settings
•
On this panel, you can define the swap file location, set shutter auto close time in FL, and set
the number of compensation images for preview camera if needed. Click Apply to accept
modifications.
– Profile behavior settings
•
Use profile history save – With this function each profile modification is saved in Profile
◦
History from which the different stages can be reloaded.
Save interval – Profile content is automatically saved at the specified time-frames.
◦
Enable setting of focus time – Parameters (Short / Normal / Long) related to focus time
◦
will be enabled on the profile settings panel. Normal is set as default.
December 7, 2018 – Rev. 1 3DHISTECH Ltd.
5.6.1 Settings
106(144)