3D Histech Pannoramic MIDI II 2.0.5 User Manual page 39

Pannoramic MIDI II 2.0.5 User's Guide
After loading server data, user name and password is required to be added for authentication
and accessing the server. If connection is successful, a green checkmark is displayed in the
window.
Use Barcode: Barcode settings can be modified in the Barcode Editor window. By predefining
•
barcode type and other settings.
Server Side Barcode Parsing option can be selected if CaseCenter is connected with the
•
supported HIS/LIS. This way the barcode read by the software is being identified, and the
predefined location of that specific case in CaseCenter is automatically selected as scanning
destination based on the CaseID (containing slide and patient data stored on HIS/LIS).
Therefore, Folder, Case, Block, and Slide name field data cannot be modified, only a profile
can be selected.
Activate Generate to create slide name automatically based on the defined criteria or From
•
barcode to create slide name based on the barcode.
December 7, 2018 – Rev. 1
Figure 16 – Window of Barcode Editor
3DHISTECH Ltd.
4.2 Main window functions
39(144)